Temporary Buydown Calculator — 2-1 and 3-2-1

Compute the exact temporary interest-rate buydown fund from principal-and-interest subsidies, then compare it with official Fannie Mae interested-party contribution caps and VA’s 4% seller-concession limit. FHA’s 6% handbook cap is shown only as a labeled starting point to confirm in current HUD Handbook 4000.1. Qualify at the note-rate payment.

Seller concessions & subsidy fund📅 Updated for 2026⚡ Instant results

Methodology review: November 21, 2026

Buydown plan

$
$10,000$2,000,000
%
0.250%15.000%

Starting point: Freddie Mac PMMS 30-year average 7.28% as of November 19, 2026. Your quoted rate will differ.

years
15 years30 years

Loan program

Occupancy

Who pays the buydown

$
$0$3,000,000
$
$0$3,000,000

VA measures the 4% concession limit against reasonable value. Fannie Mae IPCs use the lower of sales price or appraised value.

Buydown fund

$9,441.20

Note-rate P&I

$2,736.85

Qualifying payment under Fannie Mae and VA rules

Illustrated cap

$30,000.00

lower of sales price or appraised value (Fannie Mae B3-4.1-02)

Room under cap

$20,558.80

The calculated buydown fund is within the illustrated concession cap. Other interested-party credits still share the same cap.

Year-by-year subsidy

Year 1 rate5.280% (−2 pts)
Year 1 P&I$2,216.25
Year 1 subsidy$6,247.15
Year 2 rate6.280% (−1 pts)
Year 2 P&I$2,470.68
Year 2 subsidy$3,194.05

Fannie Mae Selling Guide B3-4.1-02 caps financing concessions at 6% of the lower of sales price or appraised value for this occupancy and CLTV (about 80.0% CLTV if the loan amount is the only lien entered). Investment properties are capped at 2% at all CLTVs. Excess IPCs are treated as sales concessions and deducted from the sales price. Confirm Freddie Mac's guide if the loan is Freddie-backed.

How to Use the Temporary Buydown Calculator

  1. Enter the loan amount, the note rate (the starting value is the Freddie Mac PMMS 30-year average of 7.28% as of November 19, 2026 — replace it with your Loan Estimate), and the term.
  2. Choose a 2-1, 3-2-1, or 1-0 plan, or enter custom yearly reductions. The fund is the sum of (note-rate P&I − reduced P&I) over each buydown year.
  3. Enter the sales price and appraised (or VA reasonable) value, the loan program, occupancy, and who is paying for the buydown.
  4. For USDA or another program without a copied official cap, enter the cap from current program guidance. Read the flags and the cap comparison before treating the structure as eligible.

What This Calculator Does

Search queries such as “2-1 buydown calculator” and “seller concessions on a temporary buydown” are asking two different questions: how large the subsidy account must be, and whether a seller can legally pay it. This tool answers both with official program rules instead of an invented cost factor.

A worked example: a $400,000 30-year loan at the November 19, 2026 PMMS 30-year average of 7.28% has a note-rate principal-and-interest payment of about $2,736.85. A 2-1 buydown lowers that payment to about $2,216.25 in year 1 (5.28%) and $2,470.68 in year 2 (6.28%). The required fund is about $9,441.20. A 3-2-1 buydown on the same loan requires about $18,585.89. On a $500,000 purchase with the same $400,000 loan, Fannie Mae B3-4.1-02 would cap financing concessions at 6% of the lower of price or value, or $30,000, at an 80% CLTV principal-residence loan — so both example funds fit that illustrated cap, before any other seller credits are added.

Eligibility and edge cases: Fannie Mae does not allow temporary buydowns on investment properties or cash-out refinances, and it caps the reduction at 3 points, the annual step at 1 point, and the term at three years. VA allows 2-1 and 3-2-1 structures on fixed-rate VA loans, including cash-out and IRRRL, and requires leftover funds to be applied to the indebtedness rather than returned to the funder. FHA product eligibility and the 6% cap must be confirmed in current HUD Handbook 4000.1. USDA caps are user-entered here because this page does not invent one.

Common mistakes: treating the year-1 payment as the qualifying payment; stacking a seller credit for closing costs on top of a seller-paid buydown without checking the same official cap; using a blog’s “typical 4.5% of the loan” cost instead of the subsidy math; and assuming leftover funds will be refunded. Results are planning estimates, not a loan approval or a concession legal opinion.

Formula

Fund = Σ (P&I_note − P&I_reduced) × 12 for each buydown year

P&I is the fully amortizing monthly payment at that year’s rate over the original term.

  • P&I_noteMonthly principal and interest at the note rate
  • P&I_reducedMonthly principal and interest at the bought-down rate for that year

Examples

Example: $400,000 2-1 buydown at the November 19, 2026 PMMS 30-year average

Loan amount $400,000, note rate 7.28% (Freddie Mac PMMS as of November 19, 2026), 30-year term, 2-1 plan. Purchase price and appraised value $500,000, conventional principal residence, seller-paid.

Note-rate P&I is about $2,736.85. Year 1 (5.28%) P&I is about $2,216.25, a $520.60 monthly subsidy, or $6,247.15 for the year. Year 2 (6.28%) P&I is about $2,470.68, a $266.17 monthly subsidy, or $3,194.05. The fund is about $9,441.20, inside the illustrated $30,000 Fannie Mae 6% IPC cap at 80% CLTV.

Example: The same loan with a 3-2-1 buydown

Same $400,000 loan at 7.28% for 30 years, 3-2-1 plan, same $500,000 conventional purchase.

Year 1 at 4.28% costs about $9,144.70 of subsidy, year 2 about $6,247.15, and year 3 about $3,194.05, for a fund of about $18,585.89 — still inside the illustrated $30,000 cap, but with less room for other seller credits.

Example: Investment-property flag under Fannie Mae

Same 2-1 numbers, but occupancy is set to investment property.

The IPC cap tightens to 2% under B3-4.1-02, and B2-1.4-04 does not allow temporary buydowns on investment properties. Treat the structure as ineligible on a Fannie Mae investment loan unless a different official guide applies.

Continue Your Financial Planning

Understand savings growth →Learn how APY, compounding, inflation, and account choice interact.Build a practical savings plan →Turn the calculation into automated monthly progress.Size an emergency fund →Decide how much liquid savings to keep available.

Related Guides

Temporary Buydown Guide →2-1 and 3-2-1 structures, official concession caps, and qualifying rules.Mortgage Guide →How mortgages work, escrow, and how to compare Loan Estimates.Affordability Guide →Why you should not qualify yourself on the year-1 buydown payment.

Sources and methodology

How SmartRates checks calculations · About the editorial team

📐

Methodology

Each year’s reduced rate is the note rate minus that year’s official or custom reduction. Monthly principal and interest for both the note rate and the reduced rate use the standard fully amortizing payment formula over the full original term (not a one-year term). The yearly subsidy is 12 times the difference. The concession comparison uses Fannie Mae B3-4.1-02 (3%/6%/9% of the lower of sales price or appraised value for a principal or second home by CLTV, and 2% for investment property), VA’s 4% of reasonable value for seller- or builder-paid funds, and a labeled 6% of sales price FHA handbook starting point marked for confirmation. No market “cost factor” is applied.

Frequently Asked Questions

What is a 2-1 or 3-2-1 temporary buydown?+

A temporary buydown uses an escrowed subsidy to reduce the interest rate that computes principal and interest for a limited period, then steps the rate up to the note rate. In a 2-1 plan the first year is 2 percentage points below the note rate and the second year is 1 point below. In a 3-2-1 plan the reductions are 3, then 2, then 1 point over three years. After the buydown period you pay the full note-rate payment. These structures are described on VA’s temporary-buydown page and in Fannie Mae Selling Guide B2-1.4-04.

Does a temporary buydown help me qualify for a larger loan?+

Usually not, if the loan follows official Fannie Mae or VA rules. Fannie Mae B2-1.4-04 and VA’s temporary-buydown page generally require the borrower to qualify at the full note-rate payment, not the bought-down payment. Do not pick a price based on the year-1 payment alone.

How is the buydown fund calculated? Is it a percentage of the loan?+

The fund is the sum of the monthly principal-and-interest subsidies: each month, full note-rate P&I minus reduced-rate P&I, totaled over the buydown period. This page does not use an invented “typical cost” such as a percentage of the loan amount. If a lender quotes a different deposit, ask them to show the same month-by-month subsidy math.

Who can pay for the buydown, and what counts toward seller-concession caps?+

A seller, builder, lender, or borrower may fund the account, subject to the loan program. Seller- or builder-paid funds generally count toward official interested-party contribution caps. VA’s page states that a seller- or builder-paid temporary buydown counts toward VA’s 4% seller-concession limit measured against reasonable value. Fannie Mae IPC limits are in Selling Guide B3-4.1-02. Lender-paid and borrower-paid funds can be treated differently — confirm the split with the lender.

What are the official Fannie Mae limits on temporary buydowns?+

B2-1.4-04 allows temporary buydowns on fixed-rate mortgages and on certain ARMs for a principal residence or second home. The rate reduction may not exceed 3%, the annual increase may not exceed 1%, and the period may not exceed three years. Investment properties and cash-out refinances are ineligible. Interested-party contribution caps in B3-4.1-02 still apply. If the loan is Freddie Mac-backed, confirm Freddie’s selling guide; this calculator does not invent a Freddie table.

What is the official VA rule?+

VA’s temporary-buydown page allows 2-1 and 3-2-1 structures for one to three years on fixed-rate VA loans, including purchase, cash-out, and IRRRL. Borrowers qualify at the full note-rate payment. Seller- or builder-paid funds count toward the 4% concession limit. Remaining funds must be applied to the outstanding indebtedness if the loan is paid off, refinanced, or ends in foreclosure, short sale, or deed-in-lieu, and cannot be returned to the party that funded the account.

Are temporary buydowns allowed on FHA and USDA loans?+

FHA policy lives in HUD Handbook 4000.1. Interested-party contributions, which have historically included temporary buydowns, have been capped at 6% of the sales price, and older HUD policy limited temporary buydowns to fixed-rate purchases. This calculator shows the 6% cap as a labeled handbook starting point and marks it for confirmation against the current 4000.1 text. This page does not invent a USDA concession percentage; enter the cap from current Rural Development guidance if you need a comparison.

What happens to leftover buydown funds if I pay the loan off early?+

It depends on the program and the buydown agreement. VA’s official page says remaining funds must be applied to the indebtedness and cannot be returned to the funder. Fannie Mae’s guide has its own disposition rules. Read the buydown agreement and do not assume leftover money will be refunded to you.

Is the 7.28% default rate a quote I can lock?+

No. 7.28% is the Freddie Mac PMMS 30-year average as of November 19, 2026. Replace it with the note rate on your Loan Estimate or purchase contract. Your actual rate will differ with credit, points, occupancy, and loan type.

Does this calculator include escrow for taxes and insurance?+

No. It isolates principal and interest so the subsidy math is transparent. Your total monthly payment will still include taxes, insurance, and any mortgage insurance. A temporary buydown does not freeze escrowed amounts.

Can I save my results?+

Yes. Use “Save” to store a snapshot; click “Saved” to remove it. Without an account it remains in this browser. If you log in, saved scenarios sync securely to your SmartRates account so they are available on your other devices.

How do I share my calculation?+

Click “Share” in the toolbar to copy a link (or open your device’s share sheet). The link encodes your exact inputs, so whoever opens it sees the calculator pre-filled with the same numbers and the same result.

Can I email my calculator results?+

Yes. Click “Email” to open your configured email app with the recipient blank and the subject and plain-text report filled in. Long reports use a summary and a link; use Export PDF for the complete report. Add a recipient and review before sending.

Can I export or print my results as a PDF?+

Yes. Click “Export PDF” to open a clean, printable summary of your inputs and results that you can save as a PDF or print. It includes a timestamp and a link back to the calculator.

How accurate are the calculator results?+

The arithmetic follows the formula and assumptions documented on this page. The result is still an estimate because actual rates, fees, taxes, timing conventions, eligibility rules, and provider calculations can differ. Use figures from your official quote, statement, contract, or tax form before making a financial decision.

Which inputs have the biggest effect on the result?+

Rate, time, starting balance, recurring payments or contributions, and fees usually have the largest effects. Change one input at a time to create a conservative, expected, and optimistic scenario instead of relying on a single forecast.

Are taxes, fees, and inflation included?+

Only when they appear as an input or are explicitly described in the methodology. Do not assume an omitted cost is zero. Review the formula and methodology sections to see exactly what is included before comparing the result with an outside quote.

Can this calculator predict future rates or returns?+

No. A calculator projects the assumptions entered; it cannot predict market returns, inflation, variable interest rates, tax-law changes, or provider decisions. Rerun the calculation with several assumptions to understand the range of possible outcomes.

Why might my lender, bank, broker, or tax software show a different result?+

Professional systems may use daily timing, transaction dates, compounding conventions, rounding rules, account-specific fees, credits, eligibility details, or regulations that a general-purpose calculator cannot know. A small difference can be rounding; a large difference usually means an assumption or included cost is different.

Disclaimer: Calculations are for informational purposes only and do not constitute professional financial advice. Please consult with a certified professional before making financial decisions.